All nanoFAB HVAC systems have returned to normal. The repair was complete mid-day on Wednesday and facility conditions appear to have returned to normal.
Register Now for Electron Beam Lithography Training
on May 19, 2012
Spring EBL Training is schedule for the week of May 28/12. Registration is available by emailing Steve Buswell at sbuswell@ualberta.ca. There is limited space availabile, please sign up ASAP to ensure a spot!
Victoria Day Holiday Closure
on May 16, 2012
During Victoria Day, Monday May 21/12, the nanoFAB will operate under our after hours use policy.
EBL Seminar Announcement
on May 14, 2012
The nanoFAB will be hosting a Raith Seminar on Wednesday May 23 at 11:00 am in ECERF W2-021, titled “Novel Patterning Strategies by Modulated-Beam Moving Stage (MBMS) on the RAITH150-TWO”.
Facilities Shutdown Friday, May 4th (1PM) until Monday May7th
on May 3, 2012
The U of A trades will be performing some major maintenance to the chilled water system for the ECERF building. Please check the scheduler to see what equipment will be effected and when it will be available after the shutodown. Any questions, please contact a staff member.
Temporary change – Hours of Operation
on April 18, 2012
On the mornings (8AM – 1PM) of April 23rd, April 30th & May 7th, the nanoFAB staff will be off site and unavailable, therefore access to the nanoFAB will fall under our after hours policy. On each day listed above, access will return to normal at 1PM.
Updated 4/20/12 – NanoFab Introductory Training Course – May 2, 2012
on April 10, 2012
We will be offering our mandatory Introductory Safety Training Course on May 2, 2012 from 1:00 to 3:00 pm here at the nanoFAB. This Mandatory course is offered every 2 months hopefully capturing interested potential users in a timely manner. If you registered online between Arpil 1st – 20th, please re–register. Due to technical issues, […]
Easter Closure
on April 4, 2012
The nanoFAB will be observing the Easter Holiday and as such facility access will fall under our after hours use policy for Friday, April 6/12 & Monday, April 9/12. The nanoFAB will return to normal hours on Tuesday, April 10/12.
Family Day Holiday (February 20/12)
on February 15, 2012
The nanoFAB will be closed on Monday February 20, 2011 as we are observing the Family Day holiday. Access will fall under our normal after hours access policy. We will return to normal hours on Tuesday morning.
NanoFab Introductory Training Course – March 7, 2012
on February 7, 2012
We will be offering our mandatory Introductory Safety Training Course on March 7, 2012 from 1:00 to 4:00 pm here at the nanoFAB. This Mandatory course is offered every 2 months hopefully capturing interested potential users in a timely manner.